Ora LaboraOra Labora Book a consultation

Structural Alterations in a Period Property: What You Can Change and What You Can’t

By · November 18, 2026 · Structural Surveys · Written by Munyovi Victor Indiazi

Plaster removed around a beam bearing in a period property, exposing the rubble wall core and a steel connection

In a house built after about 1930, you can usually predict where the load goes before you take anything off the wall. Cavity construction, a concrete lintel over every opening, joists running the short way, a damp proof course where you expect one. Open it up and it is more or less what the drawing would have said.

Period buildings do not work like that. They were built by eye, altered repeatedly by people who left no record, and they carry load along paths that nobody designed and nobody wrote down. That is what makes altering one interesting, and it is why the survey comes before the plan rather than after it.

What counts as a structural alteration?

A structural alteration is any change that affects how load travels through a building: removing or forming an opening in a wall, taking out a chimney breast, cutting into a floor for a stair, changing a roof line, underpinning, or adding weight the existing structure was never asked to carry.

Replacing a kitchen is not a structural alteration. Taking out the wall between the kitchen and the dining room is, whether or not anybody calls it one. The test is not how big the job looks. It is whether anything above the thing you are removing was relying on it.

Why old buildings behave differently

Four things change the answer in a period property, and all four are invisible until somebody opens up.

The walls are solid, not cavity. A solid stone or brick wall is usually two faces with a rubble and lime core between them. The faces look like the wall. The core is doing a great deal of the work, and it is the part that fails when water gets in and washes the lime out.

The mortar is lime, not cement. Lime is weaker than the masonry it bonds, which is deliberate: it lets the wall flex and lets moisture out. It also means a lime-mortared wall accommodates movement by cracking along joints, slowly, rather than failing suddenly. A crack in lime mortar is often a wall doing its job, not a wall in trouble — which is the opposite of what the same crack would mean in a modern cement-mortared one.

Timber turns up where you expect masonry. Bressummers over fireplaces, timber lintels buried in walls, wall plates carrying floors. These are structural, they are frequently decayed at the bearings where damp has reached them, and they are completely hidden.

Everything has been altered already. Usually several times, usually without calculations, often without Building Control. Half the structural problems we see in old houses were introduced by a previous alteration rather than by age. We have written more broadly about how pre-1800s buildings behave structurally and why the usual assumptions do not transfer.

What’s actually holding it up?

This is the question the whole job turns on, and in a period building it genuinely cannot be answered from the floor plan.

Internal walls in an old house may be load-bearing, may be later partitions, and may be later partitions that have become load-bearing because a floor sagged onto them over two centuries. That last category is the awkward one: the wall was not designed to carry anything, but it has been carrying something for a hundred years, and removing it will transfer that load somewhere unprepared.

Chimney breasts are the standard example. They are often doing more than holding up the chimney — floors bear into them, and stacks above rely on the breast below. Taking one out without supporting what is above it is the single most common dangerous alteration in British housing stock, and we see the consequences often enough to have written a separate piece on what to do when somebody has already removed one.

Opening up: why we take the plaster off

You cannot design around a structure you have not seen. On a period property that means removing finishes at the points that matter — bearings, junctions, the ends of beams — before anything is designed rather than after.

What opening up answers: what the wall is actually made of, how deep the bearing is, whether the timber is sound where it enters the masonry, whether there is a lintel and what it is made of, and whether an earlier alteration left something unsupported. We have set out how that process runs in what happens in a structural investigation.

It feels destructive and it is, mildly. It is also far cheaper than the alternative, which is finding out mid-build with a wall already down and the programme stopped.

Can you remove a wall in a listed building?

Often yes — but consent and engineering are two separate questions and both have to be answered.

Listed building consent covers the heritage significance of what you are changing. Building Regulations cover whether the result is structurally adequate. A conservation officer may accept a steel beam and refuse a particular finish; Building Control cares about the calculations and not at all about the finish. You can hold one approval and still be unable to build.

The practical advice is to involve both early and design for both at once. A scheme worked up purely for structural efficiency usually has to be redrawn for heritage, and a scheme worked up purely for heritage usually will not span.

What goes in instead?

Three routes cover most period alterations.

  • Steel. A beam with padstones at the bearings, sized by calculation. Strong, predictable, and usually the cheapest answer — but it is heavy, it needs a route into the building, and the bearings need masonry capable of taking a concentrated point load. In a rubble-cored wall that often means building up a proper pier first. The calculations behind removing a load-bearing wall are the same here; the bearing detail is what changes.
  • Timber. Sometimes correct in a timber-framed building, both structurally and for consent, and often preferred by conservation officers. Larger sections for the same span, so it costs headroom.
  • Repair rather than replace. A decayed beam end can frequently be spliced or resin-repaired instead of taking out the whole member. Cheaper, less disruptive, and much easier to get consent for.

Temporary works: the part that actually hurts people

The permanent design gets the attention. The dangerous phase is the one in the middle, when the original structure has been removed and the new one is not yet carrying anything.

Needling and propping has to be designed, not improvised — the props have to bear on something that can take the load, which in an old building is not a given, and the sequence has to be set out in the order it will actually be carried out. A ground floor prop standing on a suspended timber floor over a void is a prop that is holding up nothing in particular.

On a period building this matters more than on a modern one, because the structure is less redundant. A modern frame will usually find another way down. A two-hundred-year-old wall often will not.

What about the ground?

If the alteration adds weight — a new opening concentrating load onto piers, an extra storey, a heavy roof covering — the foundation has to be checked too. Period buildings frequently sit on shallow footings, sometimes on nothing more than a widened course of stone.

That does not automatically mean underpinning. A wall that has stood for two centuries has consolidated the ground beneath it and reached equilibrium. What matters is whether your alteration disturbs that equilibrium. Finding out means looking, which usually means a trial pit beside the existing foundation.

How do you know whether existing cracks matter?

Most period buildings have cracks. The question is never whether there are any — it is whether they are historic and settled, or live and moving.

Direction, position and width together tell you more than width alone. Stepped cracking through mortar joints, cracks that widen towards the top, and cracks concentrated near openings or corners are the ones worth attention. We have set out how to read them in how to read a crack in a wall.

One reading proves nothing either way. Two readings, weeks apart, is the smallest piece of evidence that actually settles the question — and it is worth starting that before the alteration rather than after, so there is a baseline to argue from if anything moves later.

Who needs to be involved?

  • A structural engineer — to establish what is holding the building up, design what replaces it, and produce the calculations Building Control will want
  • Building Control — either the local authority or an approved inspector, notified before work starts
  • A conservation officer — if the building is listed, or in a conservation area where the change is externally visible
  • A party wall surveyor — if the work affects a shared wall, which in a terrace or a converted building it very often does
  • A builder who has done this before — period work is not the same trade as new build, and the difference shows

What it costs to get it wrong

The expensive mistakes in period alterations follow a short list. A beam sized correctly but bearing onto a rubble core that cannot take the point load. A chimney breast removed with the stack above left on a gallows bracket that was never designed. A timber lintel discovered to be decayed only once the wall is already open. Temporary works propped off a floor that could not carry them.

All four are survey findings, not construction problems. All four are cheap to establish beforehand and expensive to discover halfway through.

Structural alterations in Peterborough and London

Ora Labora Structural Engineers work on period and listed buildings across Peterborough, Cambridgeshire and the surrounding towns, and from our London office across north London and Hertfordshire. A great deal of the housing stock in both areas predates the assumptions modern construction is built on.

We survey before we design, we open up where it matters rather than guessing, and the calculations come with a drawing a builder can work from. If you are planning alterations to an older property — removing a wall, forming an opening, taking out a chimney breast or converting a space — the survey is where it starts.

For more on how we work locally, see our guide to structural engineers in Peterborough, or get in touch to discuss the building.

Have a question about your own project?

Send us a drawing or a photo and an engineer will tell you what is possible.

Book a consultation
Google Reviews 4.9 31 reviews
Write a review
Andrew Vear 6 months ago

Stella did a great job for us. She liaised with building control (quite a challenge) and thought of things we would have never considered. Overall she did a great job for us and we are extremely happy with the outcome.

Read on Google
Luke Sowinski a year ago

We used Ora Labora to get structural drawings for the removal of 5 load bearing walls. I had contacted many other structural engineer firms but they were hesitant to take on the project. When I rang Ora Labora there were no issues and they were able to come out quickly to survey the property. Everyone was very professional and I was able to get the final drawings very quickly at a good price. I handed these over to my builder and they were able to complete the work without any issues. I would highly recommend and would use them again!

Read on Google
Graham Stewart 3 years ago

We were referred to Ora Labora and it was a great referral. Stella came around and checked the property and had given us enough notice of where we needed to excavate for her to get a better understanding of the existing building. Drawings were submitted for our approval before final drawings completed. All done in great time, to me. Thank you Ivy for all your effort and communication as well. Well deserved 5 plus stars.

Read on Google
Jay Shah 4 years ago

Highly recommended structural engineer. I was introduced by a friend to a very good and efficient structural engineer, Stella Macharia. She analysed the project and supported me during the process of new build on the 3rd floor. Stella attended at the site time stated and identified the issue straight away, and was very knowledgeable. I would highly recommend Ora Labora and her team and wish to continue to work with them for any future projects.

Read on Google
derek elding 6 months ago

Excellent service from all at Ora Labora, they work with you to achieve the best result for your requirements.

Read on Google
Harry Gresham 7 months ago

Smooth process and trusted team to work with for our internal renovations. Would use again.

Read on Google
yasamine watts 6 months ago

Helped us very quickly in an urgent situation, excellent work. Would definitely recommend.

Read on Google
James Ekberg 8 months ago

Really impressive service - prompt, professional, and helpful.

Read on Google
S.A.M 5 months ago

Smooth experience working with Ora Labora Ltd. Will definitely use again.

Read on Google

See all reviews on Google →